Ghost Immobiliser
Ghost immobilisers work as a covert security system that protects vehicles from being stolen. These systems stop your car from being stolen by stopping it from starting.
They are quiet, do not have LED indicators and don't require additional fobs. Therefore they cannot be hacked via the OBD port. The Ghost II immobiliser TASSA-certified can be installed in a discreet manner and without wire cutting on most vehicles.
CAN Based
A vehicle immobiliser is installed in a vehicle or van, or even a motorbike. It can also be used to prevent thefts of lawnmowers, plant machinery, and even automobiles. This kind of security system stops the engine from being started without the use of a pin code. These devices are extremely reliable and hard to defeat, making them a fantastic way to keep your vehicle safe. They can also help reduce your insurance costs, since the majority of insurance companies offer discounts for vehicles with these devices.
Ghost is an immobiliser based on CAN. This means that it is directly incorporated into your vehicle's CAN network. This is among the most advanced car immobilisers, and it makes it almost impossible for thieves to escape or disable. The system is quiet and doesn't emit signals or LEDs and can only be activated by pressing buttons on your vehicle. These buttons can be found on the steering wheel, the centre console, or on the door panels. Each button is programmed with a unique pincode that must be entered to begin the engine. The code can be between four and 20 characters. Ghost is a fully endorsed immobiliser that has been awarded the TASSA certification.
Ghost is undetectable. It is not like other types of immobilisers that can be defeated using aftermarket keyfobs or by cutting wires. It does not have any key fobs or LED indicators. Only the installers are aware of its existence. It doesn't have any key-cut sensors that could be altered and does no interfere with the engine control unit. It's a secure way to shield your vehicle from thieves and their advanced techniques.
The Autowatch Ghost II immobiliser is designed to be installed discretely into the original wiring harness of your Peugeot. This allows the device to be hidden from the view of others and ensures that it is not able to be taken away by thieves, as they would need cut through the main wiring harness to disconnect the immobiliser from the engine's control unit. The CAN immobiliser based on CAN can be disabled by the driver when in service mode, which is beneficial for when they have to hand their vehicle to valet parking or for servicing.
No Key-Fobs or LED Indications
A ghost immobiliser, or invisible security system, blocks thieves from cloning keys to cars and hacking into vehicles to take them. It also prevents them from starting your car or driving it away if they do have the key remote or fob in their possession. The technology behind it uses the CAN data bus to lock your vehicle, ensuring that the engine won't start in the event that the incorrect pin code is entered. It is not affected by RF scanning code grabbers used by hi-tech thieves to bypass your car security as there are no radio signals that are emitted.
The installation process is straightforward and does not require any cutting of wires or the removal of any components. It can be tucked away beneath the dashboard in a simple-to-access place. The unit is connected via the databus CAN and can be accessed using a PIN generated by the user. This can be done through your dashboard or via an app that you access from your smartphone. It is able to be disconnected in less than one minute from the CAN bus, without having to turn off any functions in your vehicle or alarms.
This is a more effective way to protect your vehicle than other methods, such as wheel locks and other physical deterrents. Thieves who try to steal your vehicle can be easily left wondering why the vehicle cannot start and could lead them to assume that it is broken and leave the vehicle alone. This can give you security and can help to reduce the likelihood of theft from your prized and joy vehicle.
Ghost immobilisers are a cost-effective way of adding an extra layer of security to your vehicle. It is more affordable than an alarm for your car and is easily installed by one of our TASSA certified technicians. We will demonstrate how it works, and give you the owner's manual, an emergency card, two Autowatch window stickers, and an Installation Certificate.
There is no damage to the internal Body of the vehicle.
Ghost is undetectable, unlike many immobilisers on the market. Ghost can be detected with the diagnostic tools used by hi-tech criminals to hack into vehicle security. Ghost does not use the radio signals or LED indicators. It works directly with the CAN network and can be installed to any vehicle that uses it. It is also totally wireless and can be arm and disarmed remotely using the Ghost iPhone or Android mobile app. You can do this from any location so long as your device has a good signal or is within a 5- 10m distance of the vehicle.
Autowatch Ghost is an immobiliser security device created by Autowatch, a South African company. It shields your vehicle from hacking, key cloning and keyless entry by making it extremely difficult to start the engine of your joy and pride without a unique PIN code that is only accessed by you. This code is entered by pressing a pattern of existing electrical buttons on your car.
The Autowatch ghost 2 is linked to an international vehicle register and, in the event that your vehicle is stolen and later sold for parts, the thief will not be able to sell it as it isn't registered. This will provide you with an additional layer of security when you get your car serviced, as technicians will not have access to your pin number.
During the process of installation Our Tassa registered Ghost 2 Immobiliser Installations team member will guide you through a thorough demonstration of how the system functions and what it could do for your vehicle. We will also give you the owner's manuals, installation certification and a Ghost Emergency Card.
Immobiliser ghost is a revolutionary new product designed to help combat the increasing issue of theft via contactless on our roads. It's a system that's constantly being improved and developed to ensure that it will continue to provide the highest level of protection for your vehicle. It's a simple way to add an extra layer of security and it can also be used to monitor your vehicle, alerting you to any vibrations or activity that it detects such as someone attempting to start your engine.
Easy to Install
Ghost immobilisers are compatible in conjunction with the existing vehicle's security system, unlike other car security devices that require a new key fob or wiring. It is undetectable and does not require a key fob remote, or any additional wiring. It is called "Ghost.'
Utilizing buttons on the vehicle, such as the steering wheel, the centre console, and door panels our TASSA certified installers can program an individual PIN code sequence that has to be entered to start the car, just as you do when you turn on your car. The engine will not begin until the code is entered correctly. This makes it hard to fool or guess the device.
The Autowatch Ghost-II CAN immobiliser compatible with all vehicle applications and allows you to control your car from any location. You can also check its status using the app. If it detects a theft attempt you can lock your car remotely by using the GPS feature. This feature will give you peace of mind when you're away from your vehicle knowing that it will be protected.
The Ghost immobiliser is also able to be transferred to a different vehicle in the event you decide to change cars. The Ghost immobiliser is able to be transferred to a new vehicle if you choose to switch your car. This is provided the new vehicle is connected to the same CAN network as the old one and the Ghost has the same datapack size (memory) as the old one. You can now take your Ghost wherever you go, and shield it from hacking or cloning.
The Ghost Immobiliser not only protects your vehicle from these methods It also stops thieves from by removing the ECU of your vehicle and replacing it with generic or after-market units. The device cannot be detected by standard diagnostic tools, circuit breakers or code-grabbing technologies because it uses CAN data. ghost immobiliser fitting makes it an effective and cost-effective way to guard against modern thieves.